TACHWIRE

Lamborghini in Tachwire: every model and generation

Lamborghini: every model and generation

Every car gets what it gives: most cars from 2008 on (CAN) bring the standard readings, and many makes give more from their own units. Makes are added one by one, and we only call a reading working once we’ve seen it arrive in a real drive.

Model, body code, engine or year. We never ask for a VIN.

Or pick step by step

All models by make

Confirmed

Driven with Tachwire. Every reading under “Shows” was seen in a real drive log.

No drives yet

The app recognises the car and asks it for more than the standard set. Until a drive log shows a reading arriving, we don’t call it working.

Standard OBD

The readings most cars from 2008 on (CAN) can give. What arrives depends on the car.

“Power and torque” under Shows is the engine unit’s own torque, and power as that torque × revs, read while driving — not a dyno figure; a tuned engine reads above the brochure.

How we check a car

Only by a real drive log: a drive over Bluetooth, on the move, of a car whose VIN names that model — never the simulator or the demo.

A reading counts once it has arrived in such a drive with plausible values. Until then the page says “asked for”, not “working”.

A make’s or a model’s profile stays a trial until its first drive log. New cars are proven by the logs drivers choose to send from the app.

Confirmed

No drives yet

Lamborghini

No drives yet Lamborghini is recognised from the VIN, though not the model. Every Lamborghini gets the VW Group’s trial profile for cars with CarPlay: the engine, gearbox, tyre pressures, 12 V battery and service interval from the car’s own units, once each unit names its family.

Urus ZL

Asks the car for
Oil temperatureOil pressureGearbox temperatureClutch temperaturesGearPower and torqueParticulate filterTyre pressures12 V battery chargeService dueEngine oil levelFuel in litres

not yet seen in a drive

Read only where the car’s own engine, gearbox, tyre or battery unit names a family the app knows; a reading its family doesn’t have shows a dash. AdBlue on the diesels, clutches with the dual-clutch gearbox. The Passat B8, Touran, Octavia 3 and Superb 3 from model year 2016, the first with CarPlay. A car that answers only on 29-bit CAN, as some from 2024 do, gets the standard readings for now.

Huracán ZF, Revuelto ZM, Temerario ZC

Asks the car for
Oil temperatureOil pressureGearbox temperatureClutch temperaturesGearPower and torqueParticulate filterTyre pressures12 V battery chargeService dueEngine oil level

not yet seen in a drive

Read only where the car’s own engine, gearbox, tyre or battery unit names a family the app knows; a reading its family doesn’t have shows a dash. AdBlue on the diesels, clutches with the dual-clutch gearbox. The Passat B8, Touran, Octavia 3 and Superb 3 from model year 2016, the first with CarPlay. A car that answers only on 29-bit CAN, as some from 2024 do, gets the standard readings for now.

Standard OBD

Tachwire is an independent app, not affiliated with, endorsed or sponsored by any carmaker. BMW, MINI, Audi, Volkswagen, Škoda, SEAT, CUPRA, Mazda, Honda, Acura, Toyota, GR Supra, Lexus, Ford, Porsche, Mercedes-Benz, RAM, Dodge, Jeep, Chrysler, Renault, Dacia, Alpine, Land Rover, Jaguar, Isuzu, Lamborghini, Bentley, Kia, Hyundai, Chevrolet, GMC, Cadillac, Buick, Peugeot, Citroën, DS, Opel, Vauxhall and other make and model names are trademarks of their respective owners, used here only to say which cars the app works with. CarPlay and iPhone are trademarks of Apple Inc.; Dragy is a trademark of its owner.

All makes →

Bluetooth LE

You’ll need a Bluetooth LE adapter

An iPhone talks only to Bluetooth LE adapters, not to classic Bluetooth or Wi-Fi ones. Driven on: OBDLink CX (the fastest), vLinker MC+ / FS, vLinker BM+, vLinker FD+, UniCarScan UCSI-2100, Veepeak BLE, Vgate iCar Pro BLE 4.0, OBDII Snowman, Rokodil ScanX, DIYER.

All adapters we know of

Drive one of the cars with no drives yet?

Install Tachwire from the App Store, drive as usual and send the drive from More → Help the project. A drive usually shows us which readings arrive; this page changes once they do.

Where you drove isn’t sent: location is removed on the phone; only laps on a track keep their positions.

What will not work

BMW E-series and older: nothing from the car’s own units. At most the standard readings, and only where the OBD port speaks CAN, as on most E-series built from 2007.

MINI built before 2014, and the MINI generation from 2024.

Classic Bluetooth and Wi-Fi adapters, as above.

Cars without an OBD port, or whose port does not speak CAN: the app talks CAN only, and many cars built before 2008 do not.

Your car is here but something is missing? Send a drive from More → Help the project and write to support@tachwire.app with its code. That is how a reading gets confirmed.

How to send a drive