TACHWIRE

Opel in Tachwire: every model and generation

Opel: every model and generation

Every car gets what it gives: most cars from 2008 on (CAN) bring the standard readings, and many makes give more from their own units. Makes are added one by one, and we only call a reading working once we’ve seen it arrive in a real drive.

Model, body code, engine or year. We never ask for a VIN.

Or pick step by step

All models by make

Confirmed

Driven with Tachwire. Every reading under “Shows” was seen in a real drive log.

No drives yet

The app recognises the car and asks it for more than the standard set. Until a drive log shows a reading arriving, we don’t call it working.

Standard OBD

The readings most cars from 2008 on (CAN) can give. What arrives depends on the car.

“Power and torque” under Shows is the engine unit’s own torque, and power as that torque × revs, read while driving — not a dyno figure; a tuned engine reads above the brochure.

How we check a car

Only by a real drive log: a drive over Bluetooth, on the move, of a car whose VIN names that model — never the simulator or the demo.

A reading counts once it has arrived in such a drive with plausible values. Until then the page says “asked for”, not “working”.

A make’s or a model’s profile stays a trial until its first drive log. New cars are proven by the logs drivers choose to send from the app.

Confirmed

Opel

Confirmed Opel and Vauxhall are recognised from the VIN, to model year 2018 down to the model. The engine unit tells the rest. A car of the GM era — Adam, Corsa E, Astra J and K, Insignia, Mokka, Zafira C, Cascada, Karl / Viva, Meriva B — gets GM’s trial profile: oil temperature, oil pressure, gearbox temperature and knock retard from the engine unit, the tyre pressures from the body unit. One of the PSA era — the Crossland X, the Grandland X and the models from 2019 — gets the trial profile of Peugeot and Citroën, read where its engine or gearbox names a variant the app knows. A car whose engine unit answers neither way gets the standard readings.

Adam

Shows
Knock
Not arriving yet
Oil temperatureOil pressureGearbox temperatureTyre pressures
Driven with it
AdamAdam

Astra-J, Astra-K, Cascada, Corsa-E, Insignia, Insignia-B, Karl / Viva, Meriva-B, Mokka, Zafira-C

No drives yet
Asks the car for
Oil temperatureOil pressureGearbox temperatureKnockTyre pressures

not yet seen in a drive

Crossland X, Grandland X

No drives yet
Asks the car for
Oil temperatureOil pressureGearbox temperatureClutch temperaturesPower and torqueParticulate filterAdBlue

not yet seen in a drive

Ampera, Ampera-e, Antara, Combo-D, Movano-B, Vivaro-B

Standard OBD
Usually shows, if the car reports it

No drives yet

Standard OBD

Tachwire is an independent app, not affiliated with, endorsed or sponsored by any carmaker. BMW, MINI, Audi, Volkswagen, Škoda, SEAT, CUPRA, Mazda, Honda, Acura, Toyota, GR Supra, Lexus, Ford, Porsche, Mercedes-Benz, RAM, Dodge, Jeep, Chrysler, Renault, Dacia, Alpine, Land Rover, Jaguar, Isuzu, Lamborghini, Bentley, Kia, Hyundai, Chevrolet, GMC, Cadillac, Buick, Peugeot, Citroën, DS, Opel, Vauxhall and other make and model names are trademarks of their respective owners, used here only to say which cars the app works with. CarPlay and iPhone are trademarks of Apple Inc.; Dragy is a trademark of its owner.

All makes →

Bluetooth LE

You’ll need a Bluetooth LE adapter

An iPhone talks only to Bluetooth LE adapters, not to classic Bluetooth or Wi-Fi ones. Driven on: OBDLink CX (the fastest), vLinker MC+ / FS, vLinker BM+, vLinker FD+, UniCarScan UCSI-2100, Veepeak BLE, Vgate iCar Pro BLE 4.0, OBDII Snowman, Rokodil ScanX, DIYER.

All adapters we know of

Drive one of the cars with no drives yet?

Install Tachwire from the App Store, drive as usual and send the drive from More → Help the project. A drive usually shows us which readings arrive; this page changes once they do.

Where you drove isn’t sent: location is removed on the phone; only laps on a track keep their positions.

What will not work

BMW E-series and older: nothing from the car’s own units. At most the standard readings, and only where the OBD port speaks CAN, as on most E-series built from 2007.

MINI built before 2014, and the MINI generation from 2024.

Classic Bluetooth and Wi-Fi adapters, as above.

Cars without an OBD port, or whose port does not speak CAN: the app talks CAN only, and many cars built before 2008 do not.

Your car is here but something is missing? Send a drive from More → Help the project and write to support@tachwire.app with its code. That is how a reading gets confirmed.

How to send a drive